Using Colloidal Silver in a CPAP Machine
I’m frequently asked about using colloidal silver in a CPAP machine, in order to help prevent the bio-fouling (i.e., microbial contamination) that’s so common to the water used in the reservoir, as well as the air tubes and breathing apparatus.
Since there are no clinical studies I’m aware of on this topic, I’ve turned to CPAP users to see what they have to say. Here’s what experienced CPAP users who add a little bit of colloidal silver to the water reservoir of their CPAP machine have told me…
Hi, Steve Barwick here, for The Silver Edge…
Some people write me asking if adding colloidal silver to the reservoir in their CPAP machine will keep the water and breathing apparatus from getting “funky” (i.e., coated with gunk and microbes).
Other people want to know if using colloidal silver in a CPAP machine will help with their breathing problems, or help keep their lungs infection-free.
We’ll discuss those issues, in just a moment, but first…
What’s a CPAP Machine?
For those who don’t know, a CPAP machine is a “Continuous Positive Airway Pressure” machine -- a device that helps people with a condition called sleep apnea in which airways constrict and normal breathing stops periodically during sleep.
The CPAP machine allows sleep apnea sufferers to breathe more easily during sleep, and thus keep their body’s oxygen levels from getting too low.
To do this, an air mask is worn at night. The device increases air pressure in the airways to help keep them open and keep oxygen flowing into the lungs while the individual is sleeping.
However, to prevent the soft tissues in the throat and lungs from drying out and cracking due to the added air pressure, a small amount of distilled water is usually added to a water reservoir in the CPAP machine.
Tiny amounts of this water are picked up by the air current, which in turn helps keep the soft tissues in the throat and lungs moist.
This small amount of moisture helps prevent the drying and cracking of tissues in the throat and lungs so often experienced by CPAP users.
The problem is, sometimes the water in the CPAP machine, if not changed frequently enough, can get contaminated with bacteria or fungus, and CPAP users can end up with serious chronic upper respiratory infections, bouts of bronchitis or even pneumonia.
As one unfortunate individual found out the hard way:
That pretty much sums up the experiences many people have had with their CPAP machines becoming contaminated with microbial growth that can later cause upper respiratory infections such as sinusitis, bronchitis, pneumonia and more.
They claim this helps keep the water in the reservoir disinfected and clean of microbial buildup. It reduces the frequency with which the water needs to be changed. And more importantly, it is said to help prevent the chronic upper respiratory infections so often associated with CPAP machine usage.
I’ve never used a CPAP machine, so I've never had the
opportunity to experiment with using colloidal silver in one.
The animal studies I’ve seen have demonstrated that after 90 days of breathing an atomized colloidal silver mist into the lungs, animals started accumulating silver in their lungs, which led to reduced lung function over time.
Of course, as in many animal studies in which silver is involved, overly-large dosages of silver were used by the researchers. So it’s difficult to know for sure how those studies may, or may not, apply to humans inhaling small amounts of colloidal silver into their lungs at night through their CPAP machines.
So while these animal studies do not constitute “proof” that small amounts of silver inhaled into the lungs regularly, over long periods of time, is bad for you, at the very least they certainly indicate that the lowest levels possible should be used for anyone considering experimenting with this idea.
What CPAP Users Say
“My CPAP reservoir holds about 14 oz of liquid. Typically I'll add 1 oz to 2 oz of colloidal silver, depending upon various factors, with the remainder liquid being distilled water...
I have tried a full reservoir of colloidal silver and it appears to work fine insofar as the uptake and therapy go.
I note though that the more colloidal silver I add to the reservoir the more problems I appear to have with the mucous membrane drying out in my nose, mouth, and throat...
I will say that I have no fungal growth problems with my hose or nose/mouth mask on my CPAP when using colloidal silver in the reservoir.
My wife had a fungal problem in her reservoir and hose until she started adding an ounce or two of colloidal silver to her machine and now she has none. Hope this helps."
I find that particular anecdotal account quite interesting.
It appears from the above anecdotal account that adding too much colloidal silver to the water reservoir (i.e., straight colloidal silver, instead of few ounces mixed into a reservoir full of distilled water) negates the purpose of the distilled water, which is to help keep the soft tissues in the nose, mouth and throat from drying out.
That’s probably because of mineral residue (i.e., silver) that ends up coating the lungs and afterwards drying them out, sort of like the spots on a newly cleaned glass that’s been sitting in the dish rack for awhile to dry.
But adding just the right amount of colloidal silver to the reservoir (i.e., an ounce or two of 10 ppm colloidal silver to 14 ounces of distilled water) appears to stop microbial growth in the water reservoir and the breathing apparatus without the negative effect of drying out the mucous membranes caused by using straight colloidal silver in the CPAP machine.
Another CPAP user wrote:
"I use colloidal silver in a CPAP, and the water does not get funky.
I used to have to clean my water tank and hose about every week. Now I clean it about every gallon of distilled water, which is usually a month or so.
Once cleaned, I add an ounce of colloidal silver (just for the first fill). Now there are no weird smells or funkiness.
Plus it could be a coincidence but I used to always get bronchitis - I have not had a problem since I began doing this."
So according to this anecdotal account, it appears that the addition of a relatively small amount of colloidal silver to the CPAP water reservoir (i.e., one ounce) helps keep the water disinfected, and helps prevent microbes from reaching the lungs and triggering bouts of bronchitis.
Another individual – a COPD patient -- wrote to say the following:
“I have COPD. I also use a CPAP for sleeping and use both an ampule of Albuterol and about 1 ounce of colloidal silver in the reservoir along with filling it with distilled water.
This combination has kept my lungs clear for years with no problems.
In addition, the small amount of colloidal silver in the CPAP reservoir also keeps the reservoir, hose, and mask completely free from any fungal development.”
A lady who suffers from sleep apnea wrote:
“I have sleep apnea. And when I go to sleep, I use a machine to help me breath thru the night. I add colloidal silver to the water reservoir.
Since I started using it in the water my sinuses have cleared up. I sleep much better and do not struggle to breath now.”
An individual on the GoldIsMoney2.com website wrote:
“I am using Electrically Isolated Silver [i.e., ionic silver – ED] in my CPAP machine's water reservoir (distilled water w/ 1 Tablespoon of EIS).
…My dentist complimented on how healthy my mouth has been lately. I've been with him for decades and always had trouble with gingivitis.
Since I've been using EIS [i.e., ionic silver – ED] almost daily for the last several years all my gum issues have disappeared.”
In the above case, only one tablespoon full of colloidal silver is added to the CPAP machine’s water reservoir, and a rather pleasant “side effect” was noticed, i.e., no more gingivitis.
If you find that “side effect” interesting, you might want to read the article “Colloidal Silver Cures Teeth and Gum Problems.”
Here’s another anecdotal account, this time from the online archives of the Silver List:
“I also use a CPAP with a heated humidifier. I found that after 2 weeks the tubes would start to get a mildew smell and I would have to soak everything in vinegar to get rid of it.
I then began to put colloidal silver into the humidifier about 2 years ago and I never have to clean the tubes anymore as they no longer get mildew in them.
In fact after a couple months of running colloidal silver through the system I can only guess that all the tubes became coated with silver particles as I no longer have to put colloidal silver in the humidifier any more.”
Here’s another anecdotal account, this one from a Yahoo Groups colloidal silver forum:
“Just a bit of information you may be interested in. I was diagnosed with Asbestosis (not cancerous) a few years ago. The medication (3 different puffers up to 4 times a day) was improving me very slowly.
Then I put colloidal silver in my CPAP machine for 2 nights then nothing for 2 weeks. Then 2 nights again. Now I just do the silver 2 nights about every 4 weeks and no other medication.
I'm not 100% but I'm a hell of a lot better than I was. I don't like to post on public forums, but if you find this information useful feel free to use it, BUT NOT my full name! thanks, Brian”
Notice the individual used very small amounts of colloidal silver, and only periodically, in his CPAP machine. His improvement was gradual. But he was able to wean himself off all medications for his asbestosis lung problems by doing so. Very interesting!
Here’s an account from a woman CPAP user who recommends changing the distilled water in a CPAP machine daily, and simply “spritzing” the water chamber with colloidal silver and allowing it to air dry, before adding fresh distilled water. She writes:
“The number one instruction that is ignored is to change the water every single day. Spores and other microbes are floating around in the air, and can get into the water. Hence, fresh distilled water daily is safest.
Here’s an account from a CPAP user who says she only uses colloidal silver when cleaning her CPAP equipment, but occasionally puts some colloidal silver into her water reservoir if she feels she’s coming down with a cold:
“I now use colloidal silver to clean my CPAP and only add it to the water when I am fighting a cold. I find this works well for me. Since we make our own colloidal silver, we always have lots on hand therefore when cleaning my equipment I like to fill the hose with the CS and let it sit like that for a while then air dry. Also do the same with the mask and the water container. Makes the world of difference!!”
Here’s what another CPAP user wrote about using colloidal silver in his CPAP machine at the outset of a cold:
“I’m a happy owner of a Micro-Particle Colloidal Silver Generator and I’d like to add my 2-cents to the discussion... My use of colloidal silver in a CPAP machine started at the beginning of a head cold episode.
I was already consuming several ounces of colloidal silver per day and wanted to get the presumed advantage of having silver particles in my lungs to prevent the cold virus from taking up residence in my chest.
At first I added an ounce or so in the 8-9 ounce CPAP tank. After a few overnight runs I went whole-hog and filled the tank with 10 ppm colloidal silver. My experiment was successful – the cold didn’t progress beyond the early aggravation stage.”
Naturally, a CPAP user probably wouldn’t want to continue using straight colloidal silver in a CPAP machine on a nightly basis. That could be too much for the lungs to handle over the long-term. But the above individual only did so at the outset of a cold, as a preventive measure, and it worked like a charm for him!
Here’s quite an interesting account from a person who didn’t use colloidal silver in his CPAP machine, but instead used silver dimes (i.e., pre-1965 dimes were made of 90% silver):
years, I have placed one silver American Eagle into our 5-gallon water-cooler
jugs that I refill from the filter on my tap. It keeps slime from forming in
the bottles AND in the cooler.
Of course, that works because the silver dimes leach very small amounts of silver ions into the water, on a gradual basis. Here’s one more very brief account:
“I use colloidal silver in the distilled water reservoir of my CPAP machine, to keep the water pure and to prevent microbial growth.”
So, that's what people tell me they're doing. And they claim they have no problems, so far.
And that’s probably because adding an ounce or two of colloidal silver to a 14 ounce reservoir dilutes the silver sufficiently so that the lungs can easily clean themselves of any residual silver.
Erring on the Side of
Until better information becomes available, I’d personally
either not do it at all, or only do it periodically
rather than every single day. Or at least stick to the smallest amount of
colloidal silver needed to keep the water reservoir of the CPAP machine from
becoming fouled with microbial growth.
Over time, this resulted in lesions in the lungs, and
ultimately decreased air flow. Read the details here: Using Colloidal
Silver in a Nebulizer
I’d only do it periodically, for a few days in a row, whenever I have an upper respiratory infection, because I don't want silver particles accumulating in my lungs, however rare that might be.
The lungs are wonderful contraptions; under normal circumstances they're very effective at self-cleaning, which is to say, at keeping themselves from being coated with dust, pollution and other substances that you breathe in on a regular basis.
But if you overwhelm the lung's mechanism for self-cleaning by breathing in too much of a particular foreign substance (such as silver, for example), hours-a-day, day-in and day-out for long periods of time, then it appears based on the latest animal research that you could possibly end up with silver accumulating in the lungs, and even incur lung damage over time.
So once again, it’s a situation where moderation in all things should be the watchword. I’m not telling anyone what to do. I know many people tell me they’ve been using colloidal silver in their CPAP machines for years. I’m just setting forth the facts as I understand them, and letting people make their own decisions.
To learn more about using colloidal silver in the lungs and sinuses, see:
Make Your Own Colloidal Silver for Pennies
Colloidal silver can be purchased at just about any local health food store, or through a number of online sources including Amazon.com.
However, it’s quite literally one of the most expensive and heavily marked-up nutritional supplements in existence.
Health food store owners, for example, often charge as much as $20-$30 for a tiny four-ounce bottle. Yet the cost to manufacture four ounces of colloidal silver is about 12 cents. Yes, I said twelve cents.
Of course, people are willing to pay through the nose for colloidal silver, since it’s safe and natural, and works so well against germs, mold, fungus, and even viruses.
there’s no need to pay such exorbitant prices for colloidal silver, when you
can make your own, quickly and easily, in the comfort and privacy of your own
home, for about 36 cents a quart.
If you’re interested in learning how to make your own high-quality colloidal silver at home, for about 36 cents a quart, here are some additional short articles you might want to take a look at:
Meanwhile, I’ll be back next week with another great article on colloidal silver….
Yours for the safe, sane and responsible use of colloidal silver,
Steve Barwick, author
Important Note and Disclaimer: The contents of this Ezine have not been evaluated by the Food and Drug Administration. Information conveyed herein is from sources deemed to be accurate and reliable, but no guarantee can be made in regards to the accuracy and reliability thereof. The author, Steve Barwick, is a natural health journalist with over 30 years of experience writing professionally about natural health topics. He is not a doctor. Therefore, nothing stated in this Ezine should be construed as prescriptive in nature, nor is any part of this Ezine meant to be considered a substitute for professional medical advice. Nothing reported herein is intended to diagnose, treat, cure or prevent any disease. The author is simply reporting in journalistic fashion what he has learned during the past 17 years of journalistic research into colloidal silver and its usage. Therefore, the information and data presented should be considered for informational purposes only, and approached with caution. Readers should verify for themselves, and to their own satisfaction, from other knowledgeable sources such as their doctor, the accuracy and reliability of all reports, ideas, conclusions, comments and opinions stated herein. All important health care decisions should be made under the guidance and direction of a legitimate, knowledgeable and experienced health care professional. Readers are solely responsible for their choices. The author and publisher disclaim responsibility and/or liability for any loss or hardship that may be incurred as a result of the use or application of any information included in this Ezine.
Copyright 2016 | Life & Health Research Group, LLC | PO Box 1239 | Peoria AZ 85380-1239 | All rights reserved.